Below, you can find all the updates to our Ni no Kuni: Cross Worlds cheats.
July 21, 2024
The update for both your Speeder and your driver is now complete. You must update both your driver to version 17 and Speeder to version 8. Ignore Launcher when it tells you your driver is out of date. This will be fixed shortly.
To update your driver: Run Launcher.exe -> Click Unload Driver -> Click "Load Driver" button -> Click Download Files -> Click Update Driver Only -> You can now load the new driver with Method One/Two/Three.
To update your Speeder: Run Launcher.exe -> Click Download Files -> Click Update Speeder Only -> Click Run Speeder button at the bottom.
December 16, 2023
The Ni no Kuni: Cross Worlds Speeder has been updated to version 5.
It is now possible to set specific speeds for specific attacks. The following two lines have been added to config.txt:
- 35) A list of attack IDs for which Speeder should adjust time dilation. The speed adjustment for each attack ID should be written on line 36 and correspond to the ordering of this line. For example, if I change this line to 41|42 and change line 36 to 1|1.5, my attack with an ID of 41 will have its speed reset to 1 (0% increase), and my attack with an ID of 42 will have its speed increased to 1.5 (50% increase). Attack IDs can be discerned by using the -attackid console command. I recommend setting your burst skill IDs on this line and setting their speeds to 1 (i.e., 0% increase) on line 36. If you don’t do this, your burst skills may be too fast and not register any damage. Time dilation will reset to line 27 if your character’s current attack ID does not match any of the IDs listed here.
- 36) A list of time dilation speeds corresponding to the attack IDs on line 35.
October 4, 2023
The Ni no Kuni: Cross Worlds Speeder has been updated to version 3.
The artificial delay induced by lines 13/23 has been fixed.
March 29, 2023
I've completely revamped how -download works in terms of retrieving an individualized Speeder. From now on, when the server finishes revirtualizing the program, the download link to that version will be sent to this site and dynamically displayed in every post for each game. This means that every post will have a working download link and that this link will change (along with the program) every hour or so. Before, you had to use the -download command to receive a unique version of the program. Now, every version will be unique by default, and you will no longer need to use -download. This not only makes things easier for everyone but also safer.
The dynamic download link can also be found in the guide for each game.
Happy speeding!
January 16, 2023
The NNK: Cross Worlds Speeder has been updated to include a lot of the new security features I've added to other Speeders. Moving forward, you will no longer need to update Speeder unless a new feature is added. You will still need to wait for me to update the addresses on the server, but you will not need to replace the .exe. This allows for a greater dissemination of unique executables.
Also, I noticed line 23 was not working on the global version. This has been fixed.
The readme is now online as well.
November 28, 2022
The following line has been added to config.txt:
- 34) The virtual key code of the key you'd like to enable/disable no clip (line 31).
November 5, 2022
It is now possible to teleport yourself above/below ground and continue to attack:
33) The virtual key code of the key you'd like to freeze your 'y' position (i.e. up/down). This allows you to teleport yourself up or down and attack from above or below, potentially avoiding all damage.
Use any of the various teleport commands to move yourself up or down.
October 30, 2022
The following line has been added to config.txt:
- 32) The virtual key code of the key you'd like to toggle the no cd roll hack on/off (line 22).
September 12, 2022
The following console commands have been added:
-cl — Speeder will display your current location in x, y, z. Will also add the displayed text to the clipboard for easy copy-and-paste.
-t x, y, z — Teleports your character to x, y, z. For example, -t 84.66, -78, 832
Lines 29 & 30 in config.txt can be used to set how quickly you teleport.
-tw waymarkname — Speeder will read from Waymarks.ini and gradually teleport you to the saved waymark position.
Here is how to format waymarks in Waymarks.ini:
[waymark_name]
X=84.66
Y=-78
Z=832
In the above example, you would type -tw waymark_name.
Lines 29 & 30 in config.txt can be used to set how quickly you teleport.
-tw* waymarkfilename.ini — Speeder will read from waymarkfilename.ini and teleport you to all the waymarks listed in the file, stopping at the last. Within this file, the keys must be sequentially ordered starting at 0. This is meant to be used with -record as the file generated by -record is formatted specially for this command. Nevertheless, you can certainly make your own waymark files as long as they follow this format.
-record — Speeder will record waymarks as you move your character in the game.
Typing -record a second time will save these waymarks into a file called Recorded Waymarks.ini.
After the file is saved, you can use -tw* Recorded Waymarks.ini to teleport along the path you just created. Make sure to return to the starting position first.
September 8, 2022
Setting Super Jump to 0 will prevent Speeder from ever attempting to adjust it. This means that if you activate Super Jump and then set it back to 0, your height will not be reset. To reset, use the disable keybind or type -d in the console window. You can also close and re-open Speeder.
August 27, 2022
The following line has been added to config.txt:
- 28) If 1, time dilation (line 27) will only take effect while attacking. I recommend enabling this to avoid conflicts with movement speed hacking.
August 26, 2022
New setting added to config:
27) Time dilation effect. This will speed up both your movement and your attack. It should be a value above 1.0.
For example, a value of 1.5 would speed up your attacks and movement by 50%.
-1 will disable the hack and return your speed to normal.
Some people have reported this hack works better than the generic attack speed hack. I am going to look into a toggle to only enable the hack while attacking so that this hack does not interfere with the generic movement speed hack.
August 25, 2022
The auto-burst setting (line 19) has been extended further:
19) If 1, Speeder will automatically use your weapon's burst skill when it is fully charged.
Speeder will not use the skill unless you are in combat and the game is the active window.
The skill will be activated with an ALT+1, ALT+2, or ALT+3 keypress depending on which burst skill is active.
If the ALT keypress is not working, you can set the virtual key code manually by using the "|" character. For example:
(line 19:) 1|164
164 is the virtual key code for LEFT ALT. It works for me on a U.S. English keyboard.
If it is STILL not working, you can try one additional setting after another "|":
1|164|1
The second "1" tells Speeder not to treat "164" as an extended key.
August 25, 2022
You can now set the virtual key code of the ALT key used for auto-burst. If you have a Korean keyboard, you may need to do this.
19) If 1, Speeder will automatically use your weapon's burst skill when it is fully charged.
Speeder will not use the skill unless you are in combat and the game is the active window.
The skill will be activated with an ALT+1, ALT+2, or ALT+3 keypress depending on which burst skill is active.
If the ALT keypress is not working, you can set the virtual key code manually by using the "|" character. For example:
(line 19:) 1|164
164 is the virtual key code for LEFT ALT. It works for me on a U.S. English keyboard.
August 22, 2022
New config settings:
25) Two sound files that should be played when hacks are enabled or disabled. The syntax is as follows:
EnableSound.mp3|DisableSound.mp3
The files can be named whatever you want, but the enable sound should go first, and the disable sound should go second.
Make sure the sound files are short because if a previous sound is still playing, a new sound cannot be played.
26) Cooldown timer range for the roll no cooldown hack (line 22).
By default, Speeder will remove cooldown timers for anything between 2 and 8 seconds, but this can be adjusted if needed.
The lowest timer should go on the left, and the highest on the right:
2|8
If you only want to remove the timer for a cooldown of 5 seconds, you could use:
4.5|5.5
Please note that if this setting is changed and you have already hacked your cooldowns, you will need to disable Speeder and re-enable it.
August 9, 2022
The cooldown hack should no longer interfere with regular attacks.
New config settings:
23) A list of attack IDs for skills you want to have added delays. This can prevent the attack speed hack from interfering with burst skills.
Each attack ID should be separated with the "|" character, such as: 1401|1402.
You can find attack IDs by using the -attackid console command.
Once you have inputted the IDs you need, use line 24 to set your delays.
24) How long to wait (in milliseconds) after each skill listed on line 23. The order of the delays here should match the order of the ability delays on line 23.
New console command:
-attackid — Will display the ID of your most recent skill if said skill is different from the previous one.
Input the command first and then use the skill in the game.
August 8, 2022
The following line has been added to config.txt:
- 22) If 1, Roll will not have a cooldown.
August 6, 2022
The following line has been added to config.txt:
19) If 1, Speeder will automatically use your weapon's burst skill when it is fully charged.
Speeder will not use the skill unless you are in combat and the game is the active window.
The skill will be activated with an ALT+1, ALT+2, or ALT+3 keypress depending on which burst skill is active.
July 27, 2022
The following line has been added to config.txt:
- 18) The region number you are playing on (1 = Global; 2 = Korean).
July 10, 2022
The following line has been added to config.txt:
17) The virtual key code of the key you'd like to freeze your position.
July 7, 2022
Ni no Kuni: Cross Worlds Speeder now works with the Korean client.
June 29, 2022
The following line has been added to config.txt:
- 16) If 1, the movement speed increase will be a static increase and will not be affected by buffs, mounts, etc.
June 17, 2022
I noticed the line 13 delay was affecting basic attacks for some classes. This should be fixed, but if not, let me know which class it is not working on.
New setting:
15) How many milliseconds to wait before allowing a new basic attack (i.e. the "v" key basic attack).
This functions exactly like line 13 but only affects the delay between basic attacks.
Pets will no longer glitch out when using line 13 and should function normally.
June 17, 2022
I've figured out how to differentiate between basic attacks (i.e. "v" attack) and skills such that line 13 (the artificial delay introduced between skills) will now only affect the delay between skills (and not the delay between basic attacks). In this way, the attack speed hack will provide the full benefit to your basic attacks and should greatly minimize disconnections. That is, it should be possible to achieve higher speeds than before. The readme has more explanation, but a good place to start is 1.0 on line 3 (100% attack boost) with 250 on line 13. I've removed line 15 since it is no longer necessary.
-displayas should work correctly now, and text related to the new settings should display correctly.
June 17, 2022
Thought of another helpful new setting:
15) Your auto-attack key (i.e. the key that activates your basic attack). This is usually the "v" key and is set to "v" by default.
While this key is held down, setting 13 will not activate, thus allowing you to fully benefit from the attack speed hack with your autos while preventing disconnections during skill usage.
June 16, 2022
The following settings are meant to help alleviate disconnections:
13) How many milliseconds to wait before allowing a new attack and movement.
This can alleviate disconnections when you are using the attack speed hack while still allowing you to benefit from the expedited animation.
Currently seems to glitch pets. (Will work on fix.)
I recommend using the -displayas command to see what your normal delay vs. expedited delay is. The difference between the two is what you should use here.
Example: If you have 500 normal delay and then 250 with 100% attack speed boost, you would set this setting around 250.
14) How many milliseconds to wait after an attack before allowing movement.
I added this with the hope that it would alleviate disconnections, but it does not seem to help much.
June 13, 2022
New setting:
12) If 1, the attack speed increase will be a static increase and will not be affected by buffs.
Some people have reported that buffs combined with Speeder can cause a disconnect, so you may need to enable this.
June 10, 2022
The keybinds for adjusting attack speed should now work correctly. They keybinds will also work with the general attack speed setting in the following manner:
1) If you are not holding an assigned key down: the general speed will be used.
2) If you are holding a key down: the assigned speed for that key will be used.
June 3, 2022
It is now possible to increase your max zoom distance.
Speeder will now wait to write anything to memory whenever any important address changes, which should prevent crashing during cutscenes or zoning.
I have disabled cooldown timers successfully, but there is unfortunately a server check for them.
June 3, 2022
I have changed the way these hacks work such that they will now take into account any movement/attack speed buffs you receive. The final value will be (buffed stat) * (speeder boost). This also means that the movement speed hack will auto-adjust to mounts (mount speed) * (speeder boost). When first loading the hack, because Speeder does not know what your base stats should be (e.g. if you had already hacked your stats), simply change a piece of gear so that your stats reset. If you don't do this, Speeder will just assume the lowest possible base stat.
I have found max zoom and should be able to release that soon.
June 3, 2022
Setting jump increase in config.txt back to 0 will now change jump height back to its original value.