September 5, 2026
The Mistfall Hunter Speeder has been updated to version 9.
The following keybind has been added to config.txt:
- Line 61) The virtual key code of the key to ignore the entity you are currently aiming at. You can use this key to ignore your teammates on the ESP and with the aimbot.
September 1, 2026
The Mistfall Hunter Speeder has been updated to version 8.
It is now possible to apply the speed hack to individual animations rather than globally. The easiest method is to use the new -recordani [speed] command. This will fill out line 60 in config.txt for you after you use the attacks you want expedited.
The following console commands have been added:
- -recordani [speed] — Records all performed animations and increases their speeds by "speed" when the -recordani command is used a second time. This command fills out line 60 in config.txt for you and allows you to adjust the speeds of individual animations. Initially, all animations will be increased by "speed," but you can adjust this number to be whatever you want in config.txt. Example:
- -recordani 1.25 → use the attacks you want sped up → -recordani again
- This will fill out line 60 in config.txt with your attack animations and speed them up by 25%.
- -displayani — Displays the ID of your current animation. This can be used with Speeder's speed hack (line 60) to expedite specific animations.
The following line has been added to config.txt:
- Line 60) The IDs for the animations you would like sped up, along with their speeds. The syntax is as follows:
[animation ID]:[speed]|[animation ID 2]:[speed 2]|etc.
such as
3430229:1.25|1835815:1.25|958302:1.25
to expedite Shadowstrix's basic attack animations by 25%. You can use the -recordani console command to fill out this line for you. Simply use the -recordani command, use the attacks you want sped up, and then use the -recordani command again. Speeder will fill this line out for you. You can also use the -displayani command to see animation IDs in real time if you want to fill out the line manually. Like line 59, these speeds are permanent and cannot be changed unless you use the -resetspeed command. However, the speeds 'will' reset when you change zones. Also like line 59, when using this hack online, you will rubberband if you go too fast. For me, +25% speed works fine.
August 30, 2026
The Mistfall Hunter Speeder has been updated to version 7.
I have found an attack speed hack that works online. The max speed boost is about +25%. It works with ranged and melee weapons. It can be activated via line 59 in config.txt:
- Line 59) Attack speed hack. Unlike the line 4 speed hack, this attack speed hack does work online. However, you will start rubberbanding if you go too fast. I have found +25% speed to be the sweet spot. To increase your attack animations by 25%, set this line to 1.25. To increase them by 20%, use 1.2. Etc. These speed adjustments are permanent per zone. The only way to change them again is to use the -resetspeed console command.
August 28, 2026
The Mistfall Hunter Speeder has been updated to version 6.
Fixed -scan for the Xbox version of the game.
August 25, 2026
The Mistfall Hunter Speeder has been updated to version 3.
A freeze entity hack has been added via line 49 in config.txt:
- Line 49) The virtual key code of the key to toggle the freeze entity hack on/off. When pressed, all mobs will be frozen and will be unable to attack or move. This hack probably only works in solo mode.
A visibility check has been added to the aimbot & ESP.
A mob vacuum hack has been added via line 57 in config.txt:
- Line 57) Mob vacuum settings. The syntax is as follows:
[key]|[max distance]|[vacuum distance]|[angle offset]
where 'key' is the virtual key code of the key to toggle the vacuum on/off, 'max distance' is the maximum distance under which to vacuum entities (e.g., 10000 = all mobs closer than 10000 will be vacuumed), 'vacuum distance' is how far from your character the mobs will be placed when vacuumed (e.g., 100 = the mobs will be placed 100 distance from your character when vacuumed), and 'angle offset' is at what angle the mobs should be placed relative to your character (e.g., 1.57 = the mobs will be placed in front of you). Example settings to activate mob vacuum with F10:
121|0|100|1.57
Other than the key (121), these are the default settings if this line is blank, or you do not include all possible settings. It is acceptable to only include the key, such as
121
and the rest of the settings will be set to default values.
A field of view hack has been added via line 58:
- Line 58) Field of view hack. The game's default field of view is 85. If you set this line to a higher number, your field of view will be increased and set to that number.
August 21, 2026
The Mistfall Hunter Speeder has been updated to version 2.
Added an auto-scan function when the game first opens. Speeder will automatically find the addresses it needs regardless of the version you're playing on.
August 19, 2026
The Mistfall Hunter Speeder has been released and is now available for purchase.
The Mistfall Hunter Speeder comes with the usual FPS hacks, such as ESP, radar, aimbot, triggerbot, and also includes a very nice speed hack for both movement and attack speed.
Videos will be posted shortly here.
Enjoy!