The follow lines have been re-added to config.txt:
- 68) The virtual key code of a key you'd like to toggle aiming assist on/off. See lines 70, 71, & 72 for additional settings.
- 69) The virtual key codes of the keys you'd like to enable aiming assist while pressed. Separate each key with the "|" character, such as 1|2|3|4. See lines 70, 71, & 72 for additional settings.
- 70) X-correction for the crosshair when aiming assist is enabled. 1.75 works well.
- 71) Y-correction for the crosshair when aiming assist is enabled. -1.5 works well.
- 72) If 1, Speeder will lock onto your previous target if you are not currently targeting anything.
- 73) If 1, Speeder will not move the crosshair along the y-axis, meaning that you will be responsible for aiming up/down. This can be useful for mobs that are low to the ground.
Targeting works much better now and will not be adversely affected by nearby mobs. Although I am very confident there was never an issue with aiming assist, you may wish to wait until others have tested this on trash accounts (and/or test it yourself) first. (I will continue testing it myself as well.) If you do not set any keys for aiming assist, Speeder ignores aiming assist entirely (i.e., no additional writes/reads to memory).
This requires updating Speeder to version 32.
